How to Clean Concrete Floors in Basement: Tips and Tricks for You

If your basement has heavy traffic with dirt, grease, and other grime accumulating on the concrete floors, it might be time to clean them. Cleaning concrete floors can be a tedious and time-consuming process. It involves wearing protective clothing, scraping off the layers of dirt, and doing a lot of scrubbing. The process may not be easy to embark on this chore, but it is important to keep the floors cleaned from further damage.

Cleaning your concrete basement floor may seem a daunting task, but it’s not as complicated as you might think. It’s a matter of getting the right supplies and following some basic steps. Today I have come up with how to clean concrete floors in your basement. I will also tell you what materials are necessary and how to complete each step easily. So Let’s begin the journey!

Quick and Easy Tips for Cleaning Concrete Floors in Basement

Concrete floor cleaning is not an easy task, and it takes a lot of time and hard work to actually get the floors looking clean. But it’s definitely worth the effort. Here are the top quick and easy tips for cleaning your basement floors.

Pressure Washer

If you are determined to clean your concrete basement floor, you can rent a pressure washer from Home Depot or another hardware store. An effective approach to making your concrete floor look brand new with the smallest effort.

Cleaning Instructions

Clean your concrete floor with dry cement first, then pour the solution on top and let it sit while you set up your pressure washer. Ensure you are using the correct pressure for your floor. Most floors need medium or high pressure. If you are cleaning a big area, use the fan nozzle; use the brush nozzle to clean a single place.

Concrete Cleaning Solution

Cleaning Solution is the most common method of cleaning concrete floors. It doesn’t leave any residue behind. If you have a dirty, hard-to-clean basement floor or want to improve its appearance, this is the way to go.

Cleaning Instructions

Mix the cleaning solution in a bucket. Pour the solution onto your concrete floor. Scrub the floor with a mop or a stiff brush. You can use an old towel and a broom if you don’t have one. Rinse everything off with clean water and dry the area completely. Take care to dry all the areas thoroughly, and it’s easy to miss spots if they are not completely dried. Apply an oil-resistant finish to your concrete floor to give it a nice, shiny look and keep. It will protect from stains and scuffs in the future.

Bleach

Bleach is one of the most popular ways of cleaning concrete office floors. It is healthy for the environment and quite good at removing stains, scuffs, and grease. While it does need some time to dry, this method requires very little effort on your part.

Cleaning Instructions

Mix a large amount of bleach with warm water in a bucket. Make sure the bleach is completely dissolved before adding the warm water. Don’t wet the floor if you use bleach in a large space like an office, apartment corridor, or kitchen. Otherwise, it would help soak the floor to avoid staining and fade.

Keep adding warm water until your solution is saturated. Pour the solution into a spray bottle and use it to apply the bleach onto your concrete floor with a mop or a stiff brush. Scrub your basement floor in small circles, making sure to remove any stains.

Vinegar

Vinegar is one of the simplest and most inexpensive ways to clean your basement floor, but it’s also one of the least effective. It works best when you don’t have any stains or grease. It’s a good option if you only have a few small spills. It is another easy DIY solution.

Cleaning Instructions

Mix ½ cup vinegar with 1-gallon water in a bucket. Use a soft brush to scrub your deck floor until it’s completely clean. Don’t worry if you can’t get rid of all the stains on your deck clean concrete is always better than a dirty one.

Ammonia

Ammonia is the most popular method of cleaning rock and concrete basement floors. It doesn’t require any rinsing or extra effort on your part. This method will remove stains, dirt, and scuff marks from your concrete floor without any fuss.

Cleaning Instructions

Ammonia only works when the surface is wet. Spray ammonia onto your weeds using a spray bottle or a pump sprayer, then scrub them clean using a stiff brush. Make sure you cover every inch of your floor. If necessary, add a little more water, then let the solution sit for a couple of hours before scrubbing again and rinsing. It will ensure that all the grease is removed.

Use a wet vacuum or broom to get rid of any excess ammonia and water, being careful not to leave any puddles behind. You may also want to try using a bamboo brush for added effectiveness. Finish your basement floor with an oil-resistant finish to protect it from future stains, scuff marks, and grime. 

Muriatic Acid

Muriatic Acid is a heavy-duty method of cleaning concrete walls, floors, and stairs. It effectively gets the dirt out of concrete and doesn’t need much effort on your part. You will have to be careful while wetting your floor not to get any of the acids onto other surfaces.

Cleaning Instructions

Mix ½ cup muriatic Acid with one gallon of water (4 cups) in a large bucket or blender. Add the mixture to your concrete floor and scrub it with a mop until everything’s gone. The Acid will eat away any dirt or stains, then allow you to rinse it with water. Apply an oil-resistant coating to your basement floor to prevent future stains, scuffs, and filth.

Click here to know How to Clean a Metal Mesh Cooker Hood Filter 

Salt

Salt is an excellent option for concrete floors because it’s anti-bacterial. It doesn’t work, stains, and stores easily. You can get salt about anywhere, and it’s really easy to use. It is a wonderful choice if you don’t want to manufacture a cleaning solution or rent a pressure washer. But keep in mind that salt will only aggravate an oil or grease stain on concrete.

Cleaning Instructions

Mix ½ cup of vinegar with 1 gallon of water and pour the mixture onto your concrete floor. Ensure that you are not getting the mixture onto any wood or linoleum floors. Scrub the floor with a stiff brush, then rinse it off. Wet your concrete as usual, then put some table salt onto the floor and scrub it in with a stiff brush. 

FAQs 

What Is The Best Product To Clean Concrete?

The best product to clean concrete floors is a traditional mop. You can clean your concrete floor if you have an old, large mop and bucket.

What Are The Advantages Of Cleaning Your Floors With A Mop?

Using a mop will make washing easier because you will not need a floor vacuum cleaner or steam cleaner. A normal mop can also clean the floor’s corners and edges, which most vacuums can’t reach.

What Is The Best Way To Clean Concrete Floors With A Mop?

The best way to clean your concrete floor is to use a detergent mop and bucket. You can purchase one of these online or at your local department store. They look like any other standard mop, except they come with a built-in soap dispenser. When you are ready to wash, fill the bucket with water, put in some cleanser, and wash the floor with the mop. Get those hard-to-reach spots using this method. Rinse it in the sink, hang it up, and dry completely with a cloth or paper towel.

What Tip Should Be Included?

If you want to save energy by using less water and cleaning more efficiently, you want your mop head to stay wet without getting too wet. It will ensure that the floor is cleaned as well as possible instead of leaving a wet ring on the floor. If it dries too much, it will start to pull up dirt. Lastly, don’t use any cleaner on your mop! Some cleaners contain ammonia which can damage wood floors.

Can You Use Swiffer On Concrete Floors?

No Swiffer on a concrete floor. They are for laminate and vinyl, not concrete. To clean your concrete floor properly, you must use a Swiffer.

Final Words

Now you know how to clean concrete floors in the basement. There are several ways to clean concrete floors in a basement. The most important factor is to use the right cleaner for the job. Diluted vinegar and water are a great option for general cleaning, while a bleach solution can use for more stubborn stains.

If the floor is very dirty, you may need to take a mop with a mild detergent and scrub the floor for some time. You may also want to use an acid-based cleaner or a bleach solution to clean away any stains that can’t scrub away.